ARO AIR OPERATED DIAPHRAGM PUMPS

Product Details:

ARO EXP 2” non-metallic pumps achieve flow rates of up to 184 GPM (696.4 LPM) and offer a wide array of material and porting configurations. 2” non-metallic pumps are often used for transfer, filling, recirculation and batching in Chemical, Industrial and Water/Wastewater treatment markets.

Available with Long-life PTFE diaphragms.

Benefits

Up to 4 times the life of traditional diaphragm pumps due to the EXP's convoluted diaphragm design

Efficiency - Simul-Shift™ valve provides ultra-positive, reliable shift signal

Reliability - Our patented Unbalanced air valve ensures no-stall operation

Versatility - Broad range in materials of construction for optimum fluid compatibility

Environmentally Sound - Bolted construction for leak-free fluid handling and ribless fluid caps to eliminate cracking

Serviceability - Easier service through modular design

Pump Casing Materials

• PVDF (Kynar)
• Polypropylene
• Conductive PVDF
• Conductive Polypropylene

Diaphragm Materials

 

• Long Life PTFE (not available on Conductive PVDF)
• Nitrile
• Santoprene
• Medical Grade Santoprene
• PTFE w/ Santoprene backer
• Viton
• Hytrel

Ratio: 1:1

Maximum GPM (LPM):  184 (696)

Displacement per cycle Gallons (Liters): 1.4 (5.3)

Air Inlet (Female): 3/4 - 14 N.P.T.

Fluid Inlet/Outlet: 2” A.N.S.I./DIN flange (side)

Max. operating pressure psi (bar): 120 (8.3)

Suspended solids max. dia. in. (mm): 1/4” (6.4)

Weight lbs (kg):
Polypropylene 85.3 (38.7)
PVDF  110.9 (50.3)

Maximum dry suction lift ft (m): 14 (4.2)

Sound Level: 70 PSI     60 Cycles/Min    85.0 db(A)

Additional Information:

• Production Capacity: 40-50 units
• Delivery Time: Ex -Stock or 3-4 weeks
• Packaging Details: Corrugated Box

Product Details:

ARO® EXP Series diaphragm pumps now include new 3” non-metallic models available in polypropylene or PVDF. The NEW 3” non-metallic models are reliable, efficient and offer a lower Total Cost of Ownership that has made ARO® a leading brand in the pumping industry. With flow rates up to 285 gpm (1,079 lpm) our 3” non-metallic models can meet or exceed your application requirements.

Long-Life PTFE Diaphragms also available.

3" Non-Metallic Pump Benefits

• Efficient transfer leveraging EXP air motor design
• Faster transfer, 55% more flow than ARO® EXP 2” Non-Metallic models

EXP Features

• EXP Total Cost of Ownership (TCO) Best  TCO of all major competitive models tested
• EXP Reliability Lube free patented differential valve both on major air valve and SimulShift (Pilot Valve) provides reliable worry free operation
• EXP Serviceability Modular construction, reduced parts count and simple to use repair kits will minimize repair time and cost
• EXP Control & Monitoring - Electronic interface capability assures consistent flow rates and pinpoint control. End of stroke feedback (EOS) and leak detection.
• EXP Productivity Maximized flow rates with minimized pulsation and  air consumption = Maximum Performance.

Pump Casing Materials

• PVDF
• Polypropylene

Diaphragm Materials

• Long Life PTFE
• Santoprene®
• Hytrel®
• Buna-N
• PTFE w/ Santoprene® backer

Specifications

Additional Information:

• Production Capacity: 40-50 Units
• Delivery Time: Ex stock
• Packaging Details: Corrugated Box

Product Details:

ARO EXP 1 non-metallic diaphragm pumps are a versatile solution for numerous applications. Our EXP 1 models achieve flow rates of up to 53 GPM (200.6 LPM) and offer a wide array of material and porting configurations. These pumps are often used for transfer, filling, recirculation and supply in Chemical, Industrial and Water/Wastewater treatment markets.

Available with Long-life PTFE diaphragms.

Benefits

Efficiency - Simul-Shift valve provides ultra-positive, reliable shift signal

Reliability - Our patented Unbalanced air valve ensures no-stall operation

Versatility - Broad range in materials of construction for optimum fluid compatibility

Environmentally Sound - Bolted construction for leak-free fluid handling and ribless fluid caps to eliminate cracking

Serviceability - Easier service through modular design

Pump Casing Materials

• Polypropylene
• Conductive Polypropylene
• PVDF (Kynar)
• Conductive PVDF

Diaphragm Materials

• Long Life PTFE (not available with C-PVDF)
• Santoprene
• Hytrel
• Nitrile
• Medical Grade Santoprene
• PTFE w/ Santoprene backer
• Viton

Ratio: 1:1

Maximum GPM (LPM):  53 (200)

Displacement per cycle Gallons (Liters): 0.226 (0.86)

Air Inlet (Female): 1/4 - 18 N.P.T.

Fluid Inlet/Outlet:
1 - 11-1/2 N.P.T.F., Rp1(1-11 BSP)
1 A.N.S.I./DIN flange (side or center)

Max. operating pressure psi (bar): 120 (8.3)

Suspended solids max. dia. in.(mm): 1/8 (3.2)

Weight lbs (kg):
Polypropylene, Threaded Port 19.35 (8.78)
Polypropylene, Center Ported 19.59 (8.89)
Polypropylene, Side Ported 19.87 (9.01)
PVDF, Threaded Port 25.83 (11.72)
PVDF, Center Ported 26.72 (12.12)
PVDF, Side Ported 27.15 (12.32)

Maximum dry suction lift ft(m): 19 (5.7)

Sound Level: 70 PSI    60 Cycles/Min    79.7 db(A)

 

Additional Information:

• Production Capacity: 40-50 Units
• Delivery Time: Ex-Stock or 3-4 Weeks
• Packaging Details: Corrugated Box

Product Details:

ARO 1-1/2 non-metallic diaphragm pumps are frequently used in transfer, filling, recirculation and supply in Chemical, Industrial and Water/Wastewater treatment markets. Our 1-1/2 models achieve flow rates of up to 123.1 GPM (465.9 LPM) and also offer a diverse selection of material and porting configurations.

Available with Long-life PTFE diaphragms.

Benefits

The Ultimate in chemical resistant pump design. Best Total Cost of Ownership in the industry.

Efficiency - Simul-Shift valve provides ultra-positive, reliable shift signal

Reliability - Our patented Unbalanced air valve ensures no-stall operation

Versatility - Broad range in materials of construction for optimum fluid compatibility

Environmentally Sound - Bolted construction for leak-free fluid handling and ribless design to eliminate cracking

Serviceability - Easier service through modular design

Pump Casing Materials

• PVDF (Kynar)
• Polypropylene

Diaphragm Materials

 

• Long Life PTFE
• Santoprene
• Hytrel
• Nitrile
• Medical Grade Santoprene
• PTFE w/ Santoprene backer
• Viton

• Ratio: 1:1

  Maximum GPM (LPM): 123 (465)

  Displacement per cycle Gallons (Liters): 0.617 (2.34)

  Air Inlet (Female): 1/2 - 14 N.P.T.

  Fluid Inlet/Outlet: 1-1/2 A.N.S.I./DIN flange (side or center)

  Max. operating pressure psi (bar): 120 (8.3)

  Suspended solids max. dia. in. (mm): 1/4 (6.4)

  Weight lbs (kg):
  Polypropylene, Side Ported 42.6 (19.3)
  PVDF, Side Ported 63.9 (29)
  Polypropylene, Center Ported 42.3 (19.2)
  PVDF, Center Ported 55.9 (25.3)

  Maximum dry suction lift ft (m) : 14 (4.2)

  Sound Level: 70 PSI       60 Cycles/Min  81.0 db(A)

•  

Additional Information:

• Production Capacity: 40-50 Units
• Delivery Time: Ex stock or 3-4 weeks
• Packaging Details: Corrugated Box

Product Details:

ARO EXP 1” metallic diaphragm pumps achieve flow rates of up to 52.2 GPM (197.6 LPM) and offer a wide array of material and porting configurations. These pumps are often used for transfer, filling, recirculation and batching in Ceramic, Industrial, Chemical and Petrochemical markets.

Available with Long-life PTFE diaphragms.

Benefits

Efficiency - Simul-Shift™ valve provides ultra-positive, reliable shift signal

Reliability - Our patented Unbalanced air valve ensures no-stall operation

Versatility - Broad range in materials of construction for optimum fluid compatibility

Environmentally Sound - Bolted construction for leak-free fluid handling and ribless fluid caps to eliminate cracking

Serviceability - Easier service through modular design

Pump Casing Materials

• Aluminum
• Cast Iron
• Stainless Steel
• Hastelloy-C

Diaphragm Materials

 

• Long Life PTFE
• Santoprene
• Hytrel
• Nitrile
• Medical Grade Santoprene
• PTFE w/ Santoprene backer
• Viton

• Ratio: 1:1

  Maximum GPM (LPM):  52 (197)

  Displacement per cycle Gallons (Liters): 0.232 (0.88)

  Air Inlet (Female):  1/4 - 18 N.P.T.

  Fluid Inlet/Outlet: 1 - 11-1/2 N.P.T.F.-1, Rp1(1-11 BSP)

  Max. operating pressure psi (bar): 120 (8.3)

  Suspended solids max. dia. in. (mm): 1/8” (3.3)

  Weight lbs (kg):
  PX10R-XAX-XXX 20.7 (9.4)
  PX10R-XCX-XXX 35.2 (16.0)
  PX10R-XHX-XXX 39.6 (18.0)
  PX10R-XSX-XXX 38.2 (17.3)

  Note:
  Add 4.65 lbs (2.11 kg) for aluminum air motor
  Add 11.09 lbs (5.03 kg) for stainless steel air motor

  Maximum dry suction lift ft(m): 19 (5.7)

  Sound Level: 70 PSI     60 Cycles/Min 80.6 db(A)

Additional Information:

• Production Capacity: 40-50 Units
• Delivery Time: Ex-Stock or 3-4 weeks
• Packaging Details: Corrugated Box.

Product Details:

ARO 1-1/2” metallic diaphragm pumps achieve flow rates of up to 123.1 GPM (465.9 LPM) and offer a wide array of material and porting configurations. These pumps are often used for transfer, filling, recirculation and batching in Paint, Oil & Gas, Chemical and Petrochemical markets.

Available with Long-life PTFE diaphragms.

Benefits

The ultimate in heavy duty pump design, our new EXP diaphragm pump is 20 - 40% more efficient than our competitors.

Efficiency - Simul-Shift™ valve provides ultra-positive, reliable shift signal

Reliability - Our patented Unbalanced air valve ensures no-stall operation

Versatility - Broad range in materials of construction for optimum fluid compatibility

Environmentally Sound - Bolted construction for leak-free fluid handling

Serviceability - Easier service through modular design

Pump Casing Materials

• Aluminum
• Cast Iron
• Stainless Steel
• Hastelloy-C

Diaphragm Materials

 

• Long Life PTFE
• Santoprene
• Hytrel
• Nitrile
• Medical Grade Santoprene
• PTFE w/ Santoprene backer
• Viton

Ratio: 1:1

Maximum GPM (LPM): 123 (465)

Displacement per cycle Gallons (Liters): 0.617 (2.34)

Air Inlet (Female): 1/2 - 14 N.P.T.

Fluid Inlet/Outlet:
1-1/2” - 11-1/2 N.P.T.F.-1, Rp1-1/2(1-1/2-11BSP)
1-1/2” A.N.S.I./DIN flange

Max. operating pressure psi (bar): 120 (8.3)

Suspended solids max. dia. in.(mm): 1/4” (6.4)

Weight lbs (kg):
PX15R-XAX-XXX 37.7 (17.1)
PX15R-XCX-XXX 73.2 (33.2)
PX15R-XSX-XXX 61.2 (27.8)
PX15R-XHX-XXX 86.9 (39.4)

Note: add 2.14 lbs (0.97 kg) for aluminum air motor section
add 18.14 lbs (8.23 kg) for stainless steel air motor section.

Maximum dry suction lift ft(m): 14 (4.2)

Sound Level: 70 PSI     50 Cycles/Min    81.0 db(A)

Additional Information:

• Production Capacity: 40-50 Units
• Delivery Time: Ex -Stock or 3-4 weeks
• Packaging Details: Corrugated Box

Product Details:

ARO EXP 2” metallic pumps achieve flow rates of up to 172 GPM (651 LPM) and offer a wide array of material and porting configurations. These pumps are often used for transfer, filling, recirculation and batching in Ceramic, Paint, Oil & Gas, Chemical and Petrochemical markets.

Available with Long-life PTFE diaphragms.

Benefits

The ultimate in heavy duty diaphragm pump design, this EXP model''''s new convoluted diaphragm design has up to 4 times the life of traditional diaphragm pumps.

Efficiency - Simul-Shift™ valve provides ultra-positive, reliable shift signal

Reliability - Our patented Unbalanced air valve ensures no-stall operation

Versatility - Broad range in materials of construction for optimum fluid compatibility

Environmentally Sound -Bolted construction for leak-free fluid handling and ribless fluid caps to eliminate cracking

Serviceability - Easier service through modular design

Pump Casing Materials

• Aluminum
• Cast Iron
• Stainless Steel
• Hastelloy-C

Diaphragm Material

 

• Long Life PTFE
• Polypropylene
• Hytrel
• Nitrile
• Medical Grade Santoprene
• PTFE(PTFE)/Santoprene backer
• Viton

• Ratio: 1:1

  Maximum GPM (LPM):  172 (651)

  Displacement per cycle: 1.4 (5.3) @ 100 psi Gallons (Liters)  

  Air Inlet (Female):  3/4 - 14 N.P.T.F.-1

  Fluid Inlet/Outlet (Female):
  PX20X-AXX-XXX-B( ) 2 - 11-1/2 N.P.T.F.-1
  PX20X-BXX-XXX-B( ) Rp 2 (2 - 11 BSP parallel)
  PX20X-FXX-XXX-B( ) 2” A.N.S.I./DIN Flange

  Max. operating pressure psi (bar): 120 (8.3)

  Suspended solids max. dia. in. (mm): 1/4” (6.4)

  Maximum dry suction lift ft (m): 14 (4.2)

  Sound Level: 70 PSI     50 Cycles/Min    85.0 db(A)

•  

Additional Information:

• Production Capacity: 40-50 Units
• Delivery Time: Ex-Stock or 3-4 Weeks
• Packaging Details: Corrugated Box

Product Details:

ARO EXP 3 metallic diaphragm pumps achieve flow rates of up to 275 GPM (1040.9 LPM) and offer a wide array of material and porting configurations. These pumps are often used for transfer, filling, recirculation and batching in Ceramic, Paint, Oil & Gas, Chemical and Petrochemical markets.

Available with Long-life PTFE diaphragms.

Benefits

The ultimate in heavy duty diaphragm pump design, our new convoluted dipahragm design gives this EXP model up to 4 times the life of traditional air operated double diaphragm pumps.

Efficiency - Simul-Shift valve provides ultra-positive, reliable shift signal

Reliability - Our patented Unbalanced air valve ensures no-stall operation

Versatility - Broad range in materials of construction for optimum fluid compatibility

Environmentally Sound - Bolted construction for leak-free fluid handling

Serviceability - Easier service through modular design

Pump Casing Materials

• Aluminum
• Cast Iron
• Stainless Steel
• Hastelloy-C

Diaphragm Materials

• Long Life PTFE
• Santoprene
• Hytrel
• Nitrile
• PTFE w/ Santoprene backer
• Viton

Ratio: 1:1

Maximum GPM (LPM):  275 (1041)

Displacement per cycle: 2.8 (10.6)  @ 100 psi Gallons (Liters)

Air Inlet:  (Female) 3/4 - 14 N.P.T.F. - 1

Fluid Inlet / Outlet (Female):
3 - 8 N.P.T.F. - 1
Rp 3 (3 - 11 BSP parallel)

Max. operating pressure psi (bar): 120 (8.3)

Suspended solids max. dia.  in. (mm): 3/8 (9.5)

Weight lbs (kg):
PX30A-XAX-XXX-C 129.5 (58.8)
PX30A-XCX-XXX-C 221.1 (100.3)
PX30A-AHX-XXX-C 249.4 (113.3)
PX30A-ASX-XXX-C 228.3 (103.8)
PX30A-FHX-XXX-C 269.4 (122.3)
PX30A-FSX-XXX-C 245.2 (114.4)

Note:
Add 40 lbs (18.2 kg) for stainless steel air motor section

Maximum dry suction lift ft (m): 14 (4.2)

Sound Level: 70 PSI     50 Cycles / Min    83.0db(A)

Additional Information:

• Production Capacity: 40-50 Units
• Delivery Time: Ex-Stock or 4-5 weeks
• Packaging Details: Corrugated Box

Product Details:

AROAiroperateddiaphragm pumps:
Manufacturing Expertise andFusion of proven piston pump technology.
Air-operated diaphragm pumps can easily pump fluid from clean, light viscosity fluids to rough and corrosive viscous fluids, and can transport large particles without damage. It can also be used in explosion hazard areas thanks to the compressed air motor in the air operated diaphragm pump. The air-operated diaphragm pump can change the outlet and air pressure to pump from 1 liter per minute to a maximum of 1041 liters, and use an air filter, regulator and needle valve to deliver fluid pressures up to 125 psi (8.6 kg / sec) .
Performance of ARO diaphragm pumps:
The ARO diaphragm pump provides non-stopping and non-freezing functions.
Patented "Unstallable" unbalanced air valve design prevents stall problems with other pumps connected.
The "Quick-Dump" exhaust valve converts cold exhaust air from freezing parts to prevent freezing.
Based on our 5-year warranty, we have the most reliable product line on the market.
Pump Casing Materials:

• PVDF (Kynar)
• Polypropylene

Diaphragm Materials:

• Santoprene
• Hytrel
• Nitrile
• Medical Grade Santoprene
• PTFE (PTFE) w/ Santoprene backer
• Viton
• Features:

• The Ultimate Process Pump designed to minimize downtime!!
• The new EXP is 20 – 40% more efficient than our competitors!!
• Efficiency – Simul-Shift™ valve provides ultra-positive, reliable shift signal
• Reliability – ARO’s patented “Unbalanced” air valve ensures no-stall operation
• Versatility – Broad range in materials of construction for optimum fluid compatibility
• Environmentally Sound – Bolted construction for leak-free fluid handling and ribless fluid caps to eliminate cracking
• Serviceability – Easier service through modular design.
• ARO manufactures diaphragm pumps ranging from 1/4" all the way through 3" in port size in both metallic and non-metallic bodies. International Air Tool carries all makes and models of ARO diaphragm pumps and ARO diaphragm pump repair parts. Give us a call and let us know what you are looking for, we are happy to help you.

Additional Information:

• Production Capacity: 10-50 Units
• Delivery Time: Ex- Stock
• Packaging Details: Corrugated Box